Shopping Cart
There are no more items in your cart
Simple and adjustable lanyard Progress Adjust I 2m by Petzl for progression and positioning.
It includes the Adjust blocker, which allows you to adjust the length of the rope very quickly, easily and with precision, since it is unlocked with a simple tilt and is easy to handle thanks to its ergonomic shape.
for It can be used in two ways:
It is used in simple with the Adjust blocker positioned in the ventral attachment point of the harness, when the anchor is located above the user, so that the load is distributed between the waist and the thighs for more comfort.
It is also used in double on the side attachment points of the harness. This type of connection guarantees a better distribution of the load on the harness belt.
Progression lanyards do not have an energy absorber. Therefore, they should only be used if the fall factor is less than 1 (use below the Ascension blocking cuff or anchor point).
Features:
Certificates: CE EN 358, CE 795 B, EAC, ANSI Z359.3, CSA Z259.11.
It includes the Adjust blocker, which allows you to adjust the length of the rope very quickly, easily and with precision, since it is unlocked with a simple tilt and is easy to handle thanks to its ergonomic shape.
for It can be used in two ways:
It is used in simple with the Adjust blocker positioned in the ventral attachment point of the harness, when the anchor is located above the user, so that the load is distributed between the waist and the thighs for more comfort.
It is also used in double on the side attachment points of the harness. This type of connection guarantees a better distribution of the load on the harness belt.
Progression lanyards do not have an energy absorber. Therefore, they should only be used if the fall factor is less than 1 (use below the Ascension blocking cuff or anchor point).
Features:
- Includes the Adjust blocker to adjust the length of the adjustable rope.
- It includes a holding bar Captiv Adjust that allows keeping the blocker Adjust in the correct position and fixing the clamping element and blocker to the connector
- Protective cover that protects the rope from aggressive contact points, while promoting its sliding. This protection is removable, allowing you to ascend as close as possible to the anchor when the lanyard is used in single mode.
- Includes Stuart that allows to keep the connector in the correct position when the blocker is placed on the ventral attachment point of the harness.
- Composed of a dynamic rope to limit the force transmitted to the user in the event of a low fall.
- Must be used with a carabiner with automatic safety lock (not included).
- Compatible with OK, Am & # 39; D, Bm & # 39; D and OXAN connectors.
- Manufacturing materials: aluminum, polyamide, polyester, high tenacity polyethylene (HDPE) and elastomer.
- Adjustable rope length up to 200 cm.
- Approximate weight of 185 g.
Certificates: CE EN 358, CE 795 B, EAC, ANSI Z359.3, CSA Z259.11.