The ABSORBICA-Y 150 is a double lanyard, with a compact energy absorber, designed to progress along a vertical structure or a horizontal safety line, with passage of subdivisions. It works with users between 60 and 140 kg. It allows several modes of connection to the harness and can accept different types of connectors.

Features:

• Designed to progress through a vertical structure or by a horizontal safety line, with the passage of fractions.
  
• Absorbs energy in the event of a fall:
  • Progressive tearing of the absorber tape of energy that limits the impact force supported by the user.
  • It works with users weighing between 60 and 140 kg (1).
• Designed for a use with a maximum length, including connectors, of:
  • 200 cm within the framework of the CE EN 355 standard.
  • 183 cm (6 feet) within the framework of the ANSI Z359.13 standard.
• Minimum volume:
  • Very compact design of the energy absorber so as not to disturb the user during manipulations.
  • Elastic straps so as not to hinder progression.
• Resistant textile cover, with simplified opening system, to protect the energy absorber from abrasion and splashes, allowing at the same time the periodic checks of the absorber.
  
• Two installation options on the harness depending on the use:
  • Frequent connections/disconnections: with a carabiner fixed to the correct position using the STRING fastening accessory (included with the lanyard).
  • Almost permanent connection: with a ring with RING OPEN closure whose circular shape ensures optimal positioning.
• Two possibilities of connectors at the tip of the lanyard: carabiner or MGO OPEN large opening connector.
• Certifications: - CE EN 355 (meets the requirements of the RFU PPE-R/ 11,074). - ANSI Z359.13, 12 ft. FF. - CSA Z259.11-17. - Complies with Japanese fall protection regulations. - GB/T 24538: type II. Certifications depending on the connectors used. More information in the technical sheet.
• Maximum length with connectors: - 200 cm within the framework of CE EN 355, GB/T 24538: type II and Japanese fall protection regulations. - 183 cm (6 feet) within the framework of ANSI Z359.13 and CSA Z259.11-17 standards.
• Materials: polyester and polyamide