Shopping Cart
There are no more items in your cart
A classic half rope for trad. and ice-fall climbing adventures. With a low weight and soft feel, this rope is highly appreciated by climbers for long routes on rock or ice. Technical and robust to stand up to tough use on difficult climbs.
The perfect rope for multi-purpose alpine use, it excels on ice, long-routes...
On a classic rope, if the sheath is accidentally severed, it slides and bunches over many metres. It thus becomes impossible to pass this zone, whether climbing or descending. With the UNICORE Process, the sheath stays in place and the user may escape, either by climbing or by descending, whilst taking all necessary precautions.
UNICORE on treated ropes: Prevents sheath slippage. Prevents sheath bunching. Allows escape by abseil, even if the sheath is cut.
In addition to the performance of Dry Cover, Beal also enhances the durability of the core by another exclusive procedure. Every filament in the strands of the core is coated with a fluoride solution by a continuous process, which is then heat-set and polymerised onto the polyamide. Protecting the rope from water absorption eliminates weight increase, risk of freezing on cold weather climbs, and slows the wearing of the rope considerably.
The perfect rope for multi-purpose alpine use, it excels on ice, long-routes...
Each Beal rope has an Individual Identification Number which appears at one end of the rope and guarantees the traceability of the rope.
On a classic rope, if the sheath is accidentally severed, it slides and bunches over many metres. It thus becomes impossible to pass this zone, whether climbing or descending. With the UNICORE Process, the sheath stays in place and the user may escape, either by climbing or by descending, whilst taking all necessary precautions.
UNICORE on treated ropes: Prevents sheath slippage. Prevents sheath bunching. Allows escape by abseil, even if the sheath is cut.
In addition to the performance of Dry Cover, Beal also enhances the durability of the core by another exclusive procedure. Every filament in the strands of the core is coated with a fluoride solution by a continuous process, which is then heat-set and polymerised onto the polyamide. Protecting the rope from water absorption eliminates weight increase, risk of freezing on cold weather climbs, and slows the wearing of the rope considerably.